• Model NO.：2WE67K-1000x6000
• CNC Type：Tander Prss
• Type for Fold-bending Machine：CNC Fold-bend Machine
• Application：Machinery & Hardware,
• Nominal Pressure：10000KN
• Length of Table：6000MMX2
• Transport Package：Steel Pallet
• Specification：Total 2000t, 12000mm
• Trademark：HAVEN
• Origin：China
• HS Code：8462
• Production Capacity：30 Units,Month

Basic Info.

Model NO. 2WE67K-1000x6000 CNC Type Tander Prss Type for Fold-bending Machine CNC Fold-bend Machine Application Machinery & Hardware, Nominal Pressure 10000KN Length of Table 6000MMX2 Transport Package Steel Pallet Specification Total 2000t, 12000mm Trademark HAVEN Origin China HS Code 8462 Production Capacity 30 Units/Month

Product Description

2-WE67K-1000X6000 CNC Multi-Machine Tandem Press Brake Machine




1 The frame of machine is composed of tank, worktable, left and right housings and RAM. So it has high strength and good rigidity. Also it takes vibration to eliminate Stress.

2 Synchronization working principal of both machines: Adopting electric-hydraulic Proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action.

There are two raster displayers on both sides of machine to inspect the position of RAM continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to "C" plates, not on housing plates directly, the deflection of RAM and frame when working will not effect its measuring and controlling precision.

When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.

3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of RAM could make a small tilt to meet the special requirement of user.

4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.

6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.

Model	Nominal Pressure	Length of Table	Distance between Housings	Throat Depth	Stroke	Stroes	Open Height	Main Motor	Weight	Overall Dimensions L× W× H
2-WE67K-320/7000	3200	7000	5600	720	250	≥ 1.5	870	22	38, 000	7150× 4575× 5570
2-WE67K-400/7000	4000	7000	5600	720	320	≥ 1.5	870	30	46, 000	7150× 3560× 5900
2-WE67K-600/6000	6000	6000	4800	1000	320	≥ 1.5	1000	45	62, 000	6080× 4435× 7300
2-WE67K-800/6000	8000	6000	4800	1100	350	≥ 1.5	1300	55	100, 000	6240× 7180× 6000
2-WE67K-1000/6000	10000	6000	4800	1400	400	≥ 1.5	1400	2× 45	125, 000	6240× 8080× 6600
2-WE67K-1200/7000	12000	7000	5600	1600	450	≥ 1.5	1600	2× 45	155, 000	7100× 7315× 7800
2-WE67K-1200/9000	12000	9000	6500	1100	450	≥ 1.5	1250	2× 45	165, 000	9240× 8080× 7650
2-WE67K-1600/7000	16000	7000	5600	1600	450	≥ 1.5	1600	2× 55	190, 000	7200× 5900× 7900
2-WE67K-1600/9000	16000	9000	6500	1100	450	≥ 1.5	1250	2× 55	170, 000	9240× 8133× 8250
2-WE67K-2000/9000	20000	9000	6500	1600	450	≥ 1.5	1650	2× 75	297, 000	9240× 9050× 8800
2-WE67K-2200/8000	22000	8000	6000	1100	450	≥ 1.5	1250	2× 75	245, 000	8240× 8500× 8200